Purpose 

Ensure the surface is clean, dry and free from any previous finishes. Open the grain with a Liberon Bronze Liming Brush. On softwoods such as pine, use a wire brush or coarse abrasive paper to score the timber. 

Performance 

Special effects wax Add a white colour to the grain of hardwood EN71 Part 3 Approved - Safe for toys Usage : Interior 


How to use 

Preparation 
Ensure the surface is clean, dry and free from any previous finishes. Open the grain with a Liberon Bronze Liming Brush. On softwoods such as pine, use a wire brush or coarse abrasive paper to score the timber. 
If you wish to enhance the effect, colour the wood with Liberon Palette Wood Dye before applying the liming wax. Liberon Palette Wood Dyes are available in a wide selection of wood shades. 

Application 
Work the liming wax into the grain of the wood with Liberon Ultra fine Steel Wool (0000) or a lint-free cotton cloth and wipe over with a clean cloth to remove excess. Allow to dry for 3 minutes. 
Remove the white haze using a cloth and Neutral Black Bison Paste Wax, or if a water-resistant finish is required, with Liberon Finishing Oil. 
Apply a second coat of Black Bison Wax and buff or add another coat of oil. The more coats of oil that are applied the greater the water resistance and the higher the shine. 

Important 
Always test product on a spare surface or inconspicuous area for colour, compatibility and end result. 

Coverage 
250ml = 3-4m² 


Drying Time 
5 minutes 

Tool Cleaning 
White Spirit 

Application 
Steel Wool