Liberon Beeswax Paste is ideal for nourishing absorbent woods such as pine and oak, especially unsealed. It naturally protects wood and guards against dryness. It is particularly suitable for small surfaces and furniture. 

Performance 

Traditional wax that nourishes wood Feeds wood and protects against dryness Gives an authentic finish Ideal for small surfaces and furniture Suitable for hard and softwoods EN71 Part 3 Approved - Safe for toys Endorsed by the Guild of Master Craftsmen Usage : Interior 


How to use 

Preparation 
Remove old waxes and dirt with Liberon Wax and Polish Remover if necessary. Ensure the surface is clean, dry and free from dust. 

Application 
Apply a coat of Liberon Beeswax Paste sparingly with a soft, lint-free cotton cloth or Liberon Ultra Fine Steel Wool (0000). Allow to dry for a minimum of 1 hour - longer if possible, then buff with a clean cotton cloth or Liberon Drill Brush. Repeat the operation on new or very dry wood as it may require two or more coats. For a higher sheen build-up with thin coats of Beeswax, buffing between coats. Buff with a Liberon Furniture Brush or Drill Brush once the last coat has completely dried. 

Important 
Always test product on a spare surface or inconspicuous area for colour, compatibility and end result. 

Cleaning and maintenance 
Wipe over with a cloth or duster and re-wax as required when the surface looks dull and tired. Do not wash with water. 

Precautions 
Not suitable for high water areas such as kitchens and bathrooms. 

Colour
Clear

1L = 10-12m² 


Drying Time 
Minimum 1 hour 

Tool Cleaning 
White Spirit 

Application 
Brush - cloth